Not just forks ... but a growing catalog of custom and
higher capacity forks, accessories, attachments and our
own custom-designed products make Fork-Co a valued
supplier to the forklift industry.
SERIES WPH-SW-HD Pipe Hold Down Clamps are the heavy load handlers of the line. Designed to operate well on Forklifts ranging from 35,000 LB to 55,000 LB capacity at 48 inch load center.
ATTACHMENTS DESIGNED AND BUILT IN TEXAS BY FORK-CO USA
Content copyright 2016. fork-co.com. All rights reserved.
SAFER STONE HANDLING COMES FROM USING THE RIGHT TOOLS.
FORK-CO'S GA30 D SLAB BUNDLE EXTRACTOR IS THE RIGHT TOOL.
SERIES WPH-SW Pipe Hold Down Clamps are mid-range capacity handlers for forklifts 25,000 LB through 36,000 LB @ 24" load center.
The GA30 D by Fork-Co USA is the smart choice for extracting slab bundles from containers.
It is easy to install and remove and requires no tools. The forklift stays a forklift and not a dedicated bundle extractor.
A movable lifting fork assists operators in alignment of the attachment with the stone.
Simple, direct cylinder-driven sideshift function eliminates the troublesome hydraulic motor and rack gear system.
Removable rubber-surfaced adapter pads protect the stone surface
Lube free polymere bearings are used in the clamp frame and the sideshift track.
All the above, including safer unloading, at a very economical price.
SERIES WPH-PPC Pipe Hold Down Clamp (Patent Pending) is designed to operate in restricted overhead areas like cantilever racks. The parallel-to-fork clamping movement ensures even clamping anywhere along the tines. Very finite arm control allows easy positioning. of the loads. Also great for rectangular beams. This clamp can handle loads that have different dimensions from one end to the other.
Designed and manufactured by Fork-Co USA in Alvin, Texas.
INTELLIGENT SOLUTIONS FOR UNIQUE APPLICATIONS
Our many years of application experience at Fork-Co and Unit Load Handling Systems help customers in their selection and design of the best attachments for the job at hand. Whether the application requires lifting, moving, positioning, rotating, clamping, pushing, protecting or reaching, we have the machinery and equipment to do it best.
SERIES WPH-PH Pipe Hold Down Clamp Clamp operates using upper main and lower secondary arm hydraulic control. Single function with sequence or dual function with operator clamp pad control. Offset arms ensure clamping arm can be directly above the forks. Designed for forklifts ranging from FEM/ISO class 2, 3, 4 and larger forklift trucks to 12 tons (25,000 LB).
Manufactured and designed by Fork-Co USA, Alvin, Texas.
ARMS LIFT FOR PALLET HANDLING
PH: 281-692-1667 / 888-367-5260 FX: 281-692-1450; PHYS.: 19113 AMOCO DRIVE SOUTH, ALVIN, TX 77511; MAIL: 2301 SO. MISSION CIRCLE, FRIENDSWOOD, TX 77546
FORK-CO DISTRIBUTES AND MANUFACTURES QUALITY FORKLIFT ATTACHMENTS AND FORKS.