ITA Class III & IV Forklift Forks

ITA Hook Type Forks (6,000-17,500lbs @ 24" LC)
ITA Hook-Type Forklift Forks are the Industry Standard. Often referred to as Forklift Blades or Forklift Tines. The majority of light duty Forklifts are ITA Class II, II, or IV. This type of Fork hangs on your carriage using opposing "hooks" that engage the upper and lower fork bars on standard ITA Carriages. Fork-Co keeps a very large inventory of standard and non-standard sizes at our facility in Alvin, TX.
If the size you need isn't listed below, give us a call or send us an email, odds are we either have it, or can get / make it quickly..
Also See Class II FORKS and Full-Taper & Polished or Lumber Forks
Need Slight Longer Forks? Standard Extensions or HD Extensions
Model No. | Mounting Class | T x W x L |
Capacity @24" LC
|
Buy Now |
3-175536ST | III | 1.75 x 5 x 36 | 8,500 | Click here to Buy Now |
3-175542ST |
III |
1.75 x 5 x 42 |
8,500 |
Click here to Buy Now |
3-175548ST |
III |
1.75 x 5 x 48 |
8,500 |
Click here to Buy Now |
3-175554ST |
III |
1.75 x 5 x 54 |
8,500 |
Click here to Buy Now |
3-175560ST |
III |
1.75 x 5 x 60 |
8,500 |
Click here to Buy Now |
3-175572ST |
III |
1.75 x 5 x 72 |
8,500 |
Click here to Buy Now |
3-175584ST |
III |
1.75 x 5 x 84 |
8,500 |
Click here to Buy Now |
3-175596ST |
III |
1.75 x 5 x 96 |
8,500 |
Click here to Buy Now |
3-200548ST |
III |
2 x 5 x 48 |
9,500 |
Click here to Buy Now |
3-200554ST |
III |
2 x 5 x 54 |
9,500 |
Click here to Buy Now |
3-200560ST |
III |
2 x 5 x 60 |
9,500 |
Click here to Buy Now |
3-200572ST |
III |
2 x 5 x 72 |
9,500 |
Click here to Buy Now |
3-200596ST |
III |
2 x 5 x 96 |
9,500 |
Click here to Buy Now |
3-200642ST | III |
2 x 6 x 42 |
10,000 | Click here to Buy Now |
3-200648ST |
III |
2 x 6 x 48 |
10,000 |
Click here to Buy Now |
3-200654ST |
III |
2 x 6 x 54 |
10,000 |
Click here to Buy Now |
3-200660ST | III | 2 x 6 x 60 | 10,000 | Click here to Buy Now |
3-200672ST | III | 2 x 6 x 72 | 10,000 | Click here to Buy Now |
3-200684ST | III | 2 x 6 x 84 | 10,000 | Click here to Buy Now |
3-200696ST | III | 2 x 6 x 96 | 10,000 | Click here to Buy Now |
3-2006120ST | III | 2 x 6 120 | 10,000 | Click here to Buy Now |
Model No. | Mounting Class | T x W x L |
Capacity @24" LC
|
Buy Now |
4-200642ST | IV | 2 x 6 x 42 | 12,500 | Click here to Buy Now |
4-200648ST |
IV |
2 x 6 x 48 |
12,500 |
Click here to Buy Now |
4-200654ST |
IV |
2 x 6 x 54 |
12,500 |
Click here to Buy Now |
4-200660ST |
IV |
2 x 6 x 60 |
12,500 |
Click here to Buy Now |
4-200672ST |
IV |
2 x 6 x 72 |
12,500 |
Click here to Buy Now |
4-200684ST |
IV |
2 x 6 x 84 |
12,500 |
Click here to Buy Now |
4-200696ST |
IV |
2 x 6 x 96 |
12,500 |
Click here to Buy Now |
4-250642ST |
IV |
2 x 6 x 42 |
17,500 |
Click here to Buy Now |
4-250648ST |
IV |
2 x 6 x 48 |
17,500 |
Click here to Buy Now |
4-250654ST |
IV |
2 x 6 x 54 |
17,500 |
Click here to Buy Now |
4-250660ST |
IV |
2 x 6 x 60 |
17,500 |
Click here to Buy Now |
4-250672ST |
IV |
2 x 6 x 72 |
17,500 |
Click here to Buy Now |
4-250684ST |
IV |
2 x 6 x 84 |
17,500 |
Click here to Buy Now |
4-250696ST |
IV |
2 x 6 x 96 |
17,500 |
Click here to Buy Now |
4-2506120ST |
IV |
2 x 6 x 120 |
17,500
|
Click here to Buy Now |
ITA Hook Type Forks:
Hook-ITA fork classes are the same world -wide under ISO standards. The standard FEM hook style fork arms come in two types, “A’ & “B”. The difference in the types reflect differences in the ground-to-carriage distance when the mast id fully lowered. Type “A” is primarily used for indoor and many outdoor trucks. Type “B” is primarily intended for outdoor trucks. However, the applications can be interchangeable. Type “B” forks can replace type “A” forks, but not vice-versa because the type “A” would not reach the ground.
In North America, classes are designated by Roman numerals. The rest of the world uses Arabic numbers.
Hook Fork Classes:
Class I is forklifts up to 1,999 LB at 24” load center
Class II is forklifts rated 2,000 LB through 5,500 LB @ 24” load center
Class III is forklifts rated 6,000 LB to 10,000 LB @ 24” load center
Class IV is forklifts rated 10,000 LB to 17,500 LB @ 24” load center
Class V is forklifts rated from 17,500 LB to 24,000 LB at 24” load center
If unsure, measure the carriage height from top edge to bottom edge:
Class I: 13”
Class II: 16”
Class III: 20”
Class IV: 25”
Class V: 28.67”
Under-Clearance by type:
Class I a 3” Class I b 4.5”
Class II a 3” Class II b 6”
Class III a 3” Class III b 8”
Class IV a 5” Class IV b 10”
Class V a 5” Class V b 10.12”
Rough terrain trucks will possibly have higher under-clearance, but not always.
High Under-Clearance Forks:
Popular in many Euro and Asian brand trucks since many of those are standard with solid “pneumatic” tires so they can be indoor-outdoor trucks.

Fork-Co Leads the Pack
With our industry best lead times (4-5 weeks on complex builds), full in-house engineering and design team, on-site manufacturing and fabrication facility just south of Houston, TX, and very large standard product inventory, Fork-Co is the right choice for your project. We stand behind our products 100%, either it accomplishes your goals, or we aren't done