4-250684ST
Fork-Co: FORK - ITA Class IV, 2.5x6x84, Standard Taper, Minimum Order Qty of 2 pieces.
ITA Class IV Forklift Forks 2.5" x 6" x 84" Standard Taper (21,400lbs @ 24" Load Center)
ITA Hook-Type Forklift Forks are the Industry Standard. Often referred to as Forklift Blades or Forklift Tines. The majority of light duty Forklifts are ITA Class II, II, or IV. This type of Fork hangs on your carriage using opposing "hooks" that engage the upper and lower fork bars on standard ITA Carriages. Fork-Co keeps a very large inventory of standard and non-standard sizes at our facility in Alvin, TX.
Check out the Tabs on the Forks Overview Page for more information on Standard ITA Class IV Forks!
Other Common Sizes:
Model Number | Mounting Class | T x W x L | Capacity @ 24" LC | Buy Now |
4-250642ST | ITA Class IV | 2.5" x 6" x 42" | 21,400** | Click here to Buy Now |
4-250648ST | ITA Class IV | 2.5" x 6" x 48" | 21,400** | Click here to Buy Now |
4-250654ST | ITA Class IV | 2.5" x 6" x 54" | 21,400** | Click here to Buy Now |
4-250660ST | ITA Class IV | 2.5" x 6" x 60" | 21,400** | Click here to Buy Now |
4-250672ST | ITA Class IV | 2.5" x 6" x 72" | 21,400** | Click here to Buy Now |
4-250684ST | ITA Class IV | 2.5" x 6" x 84" | 21,400** | Click here to Buy Now |
4-250696ST | ITA Class IV | 2.5" x 6" x 96" | 21,400** | Click here to Buy Now |
4-2506120ST | ITA Class IV | 2.5" x 6" x 120" | 21,400** | Click here to Buy Now |
** Forks with 2.5" x 6" or larger cross section are mechanically capable of greater than the 15,500lb maximum capacity of an ITA Class III Carriage. The capacity rating of the Forks in no way increases the capacity of the forklift. The Forklift Manufacturer's Capacity Rating always prevails.
Specifications
ITA / FEM Class | ITA Class IV |
Fork Length | 84" (84 Inches) |
Taper Style | Standard Taper |