2-150448FT

    220.00 220.00 220.0 USD

    220.00

    Esta combinación no existe.

    Agregar al carrito

    FORK - ITA Class II, 1.5x4x48, Full Taper Polished
    1ea. Qty of 2 needed for a set. Forks sold in sets only to ensure tip alignment.


    ITA / FEM Class: ITA Class II
    Fork Length: 48" (48 Inches)
    Taper Style: Full Taper & Polish


    ITA Class II Forklift Forks 1.5" x 4" x 48" Full Taper (4,675lbs @ 24" Load Center)

    Often referred to as Lumber Forks or Plywood Forks, these fork tines are different than standard taper forks in the sense that the taper starts near the heel and continues all the way to the the tip of the fork.

    Tips on fully tapered forks are typically squared off, with a chisel tip making them on the tips thinner than standard forks. The purpose of this style fork is to effectively and efficiently lift bundles of wood building material without damaging the load with a forged finish or narrower contact surface. 

    FTP Style Forks are also used frequently when "scooping" un-palletized loads directly off of the ground or floor. The Full Bottom Taper allows the chisel tip to sit directly on the ground to be effective in this application.

    Check out the Tabs on the Forks Overview Page for more information on Full Taper ITA Class II Forks!

    Other Common Sizes:

    Model Number

    Mounting Class

    T x W x L

    Capacity @ 24" LC

    Buy Now

    2-125542FTITA Class II1.25" x 5" x 42"2,500Click here to Buy Now
    2-125548FTITA Class II
    1.25" x 5" x 48"3,700Click here to Buy Now
    2-125654FTITA Class II
    1.25" x 6" x 54"4,200Click here to Buy Now
    2-150448FTITA Class II
    1.50" x 4" x 48"4,675Click here to Buy Now
    2-150548FT
    ITA Class II
    1.50" x 5" x 48"5,500Click here to Buy Now
    2-150560FTITA Class II
    1.50" x 5" x 60"5,500Click here to Buy Now
    2-150648FTITA Class II
    1.50" x 6" x 48"6,800*Click here to Buy Now
    2-175572FTITA Class II
    1.75" x 5" x 72"6,970*Click here to Buy Now

    * Fork capacity shown is greater than the maximum capacity of the carriage. The capacity rating of the Forks in no way increases the capacity of the forklift. The Forklift Manufacturer's Capacity Rating always prevails.