4-200848FT
Fork-Co: FORK - ITA Class IV, 2x8x48, Full Taper Polished, Minimum Order Qty of 2 pieces.
ITA Class IV Forklift Forks 2" x 8" x 48" Full Taper (14,280lbs @ 24" Load Center)
Often referred to as Lumber Forks or Plywood Forks, these fork tines are different than standard taper forks in the sense that the taper starts near the heel and continues all the way to the the tip of the fork.
Tips on fully tapered forks are typically squared off, with a chisel tip making them on the tips thinner than standard forks. The purpose of this style fork is to effectively and efficiently lift bundles of wood building material without damaging the load with a forged finish or narrower contact surface.
FTP Style Forks are also used frequently when "scooping" un-palletized loads directly off of the ground or floor. The Full Bottom Taper allows the chisel tip to sit directly on the ground to be effective in this application.
Check out the Tabs on the Forks Overview Page for more information on Full Taper ITA Class IV Forks!
Other Common Sizes:
Model Number | Mounting Class | T x W x L | Capacity @ 24" LC | Buy Now |
| 4-1501048FT | ITA Class IV | 1.5" x 10" x 48" | 11,390 | Click here to Buy Now |
| 4-1501248FT | ITA Class IV | 1.5" x 12" x 48" | 13,770 | Click here to Buy Now |
| 4-200648FT | ITA Class IV | 2" x 6" x 48" | 10,710 | Click here to Buy Now |
| 4-200848FT | ITA Class IV | 2" x 8" x 48" | 14,280 | Click here to Buy Now |
Specifications
| ITA / FEM Class | ITA Class IV |
| Fork Length | 48" (48 Inches) |
| Taper Style | Full Taper & Polish |
