Rotating Fork Positioner

                  Capacities from 3,500 to 7,500 LB

This attachment is built using our FORK-CO Pallet Fork Clamp as a base.  The differences between clamps and positioners are that positioners use smaller bore cylinders than clamps to reduce the stresses on the arms,  and positioners have a lesser opening range.  Fork positioners are not intended to squeeze and clamp the load.  Pallet fork clamps are for that purpose.

Features: 
RDD-Series direct drive high torque rotator.
Extruded aluminum frame and polymer bushings.
Alloy steel “T”-bar arm carriers.
360 degree rotating hydraulic distributor with lock valves.
Various fork sizes
Various opening ranges
Hydraulic counterbalance valve to prevent runaway and drifting.

Get Your Quote Now
Specifications:
Recommended Operating Pressure: 1500 Psi Max.
Recommended Oil Flow: 6-10 GPM

Capacities Available @ 24 Inch Load Center:
3,500 Lb  Class II With 1.75 X 4 Forks
4,500 Lb  Class II/III With 1.75 X 5 Forks
6,000 Lb  Class III With 2 X 5 Forks
7,000 Lb  Class III With 2 X 6 Forks

Capacities shown are attachment capacities only.  Consult forklift
manufacturer for the actual capacity rating on your forklift.

Simple. Fast. Financing. 

Conserve Capital. Lease or Rent.

 

Odoo • Image and Text

Fork-Co Leads the Pack

With our industry best lead times (4-5 weeks on complex builds), full in-house engineering and design team, on-site manufacturing and fabrication facility just south of Houston, TX, and very large standard product inventory, Fork-Co is the right choice for your project. We stand behind our products 100%, either it accomplishes your goals, or we aren't done.