SW Pipe Hold Down Clamp

Handles a variety of pipe and round stock sizes safely. Models available for standard and wide opening ranges, various lengths and widths. Easy installation onto existing forklifts. No lost usable fork length. Rugged and durable design.

Model	Truck Capacity @ LC	Carriage Width Min-Max	Fork Length	Weight LBS	HCG Lowered
WPH-SW-MD2	18 - 25,000	84 - 98	96	2700	41
WPH-SW	26 - 36,000 @ 24"	84 - 120	96	3400	46
WPH-SW-HD	35 - 52,000 @ 48"	90 - 120	96	4600	46

FORK BAR MOUNTING

ALL PIPE CLAMPS IN THE WPH SERIES ARE DESIGNED FOR PIPE DIAMETERS FROM 3 INCHES TO 36 INCHES STANDARD. CONSULT FORK-CO FOR VARIATIONS AS REQUIRED.

FORK-CO’S UNIT PIPE CLAMPS REQUIRE NO WELDING, CUTTING OR MODIFICATIONS TO THE ORIGINAL FORKLIFT TRUCK CARRIAGE. OUR CLAMPS EMBED INTO THE FORK CARRIAGE ON THE ORIGINAL FORK MOUNTING BAR.

SPECIFICATIONS DEPEND ON THE FORKLIFT CARRIAGE AND MOUNTING CONNECTION. DETAILED NUMBERS AND DIMENSIONS ARE DETERMINED AT THE TIME OF QUOTING AND VARY ACCORDING TO THE REQUIRED MOUNTING DIMENSIONS. CONSULT FORK-CO FOR ADDITIONAL INFORMATION.

ALL CLAMPS REQUIRE SINGLE FUNCTION HYDRAULIC SUPPLY.

TWO-FUNCTION CONTROLS ARE AVAILABLE ON ORDER. ASK FORK-CO FOR THIS ARRANGEMENT.

CLAMP ARM CONTACT SURFACE IS STEEL IN STANDARD CONFIGURATION. PROTECTIVE PADDING IS AVAILABLE. PADS CAN ALSO BE FACTORY-DRILLED FOR FUTURE PADDING INSTALLATION.

ALL FORK-CO PIPE CLAMPS COME COMPLETE WITH ALL HOSING AND OPERATING VALVES INSTALLED. INSTALLER SUPPLIES THE SHORT CONNECTOR HOSES FROM FORKLIFT TO CLAMP HOSE TERMINATION BULKHEAD LOCATED AT REAR OF THE RIGHT HAND ARM.

MAXIMUM OPERATING PRESSURE RANGE IS 1800 TO 2000 PSI. TRUCK AUXILIARY SETTINGS MUST BE IN COMPLIANCE TO ENSURE SECURE LOAD RETENTION TO PREVENT EXCESS FORK DEFLECTION.

ALL FORK-CO PIPE CLAMPS ARE MADE IN TEXAS, USA.

CONSULT FORKLIFT MANUFACTURER FOR ACTUAL RESIDUAL CAPACITY OF THE FORKLIFT WITH THE CLAMP INSTALLED

Simple. Fast. Financing.

Conserve Capital. Lease or Rent.

Fork-Co Leads the Pack

With our industry best lead times (4-5 weeks on complex builds), full in-house engineering and design team, on-site manufacturing and fabrication facility just south of Houston, TX, and very large standard product inventory, Fork-Co is the right choice for your project. We stand behind our products 100%, either it accomplishes your goals, or we aren't done.