Pipe Hold Down Clamps Overview
Pipe handling safety shouldn't be a balancing act. At FORK-CO our pipe hold-down clamps are designed to securely handle a wide range of pipe diameters and lengths. They are adaptable, with several different designs, to most any forklift, tele-handler or loader.
AB Series Pipe Hold Down Clamp
AB Series PIPE HOLD-DOWN CLAMP is designed to fit class 2 and class 3 (ITA/FEM/ISO) hook type carriages while retaining the sideshift function, if used, on most forklifts. The AB series handles pipe ranging from 2.8 inch diameter up to 20 inch diameter in lengths to 40 feet. This clamp is easy to install using ITA/FEM standard hooks.
The clamp has zero lost load thickness so the original fork length is retained. It opens to vertical, allowing the forklift to handle conventional cargo.
All of the clamp hydraulics are installed and this unit ships ready to plug and work. Give us a call or email us by our contact page. We can review your forklift setup to see if Series WPH-AB is right for your application.
AB Pipe Clamps Class II and III (View Details)
AB-C Pipe Clamp Class IV (View Details)
AB Telehandler Installation (View Details)
SW Series Pipe Hold Down Clamp
The SW Pipe Hold-Down Clamp is a robust clamp for most large forklifts. It is adaptable to forklift carriages as a retro-fit or to new forklifts. There is no loss of usable fork length.
25,000 LB to 36,000 LB at 24" load center trucks. 3" - 36" diameter range. 96" long forks. Built in Texas under our Unit Load Handling Systems brand name
The SW-HD Pipe Hold-Down Clamp is a heavy duty clamp for the heavy weight lifters, the larger forklifts. It is adaptable to forklift carriages as a retro-fit or to new forklifts. There is no loss of fork length when installed.
36,000 LB through 60,000 LB at 48" load center trucks. 2.75" - 36" diameter range
SW Series Pipe Hold Down Clamps (View Details)
FL Series Pipe Hold Down Clamp
FL Series Pipe Hold Down Clamp (View Details)
Designed for loaders, extenders & forklift trucks. The FL series is a direct
clamping, floating contact pad clamp for
small to large diameter pipe.
Log and Pole Hold Down Clamp - Log Grapple
Log and pole grapples are available in sizes from ITA Class III and Class IV up to 45,000 LB capacity, pin type mounting.
These attachments are equipped with their own fork carriage. Installation is to the front of the existing carriage. The original truck forks can be installed on the grapple’s frame.
Opening ranges and arm length/spacing are forklift/loader dependent.. Send us your specs for a quote.
Log and Pole Hold Down Clamp - Log Grapple (View Details)
Fork-Co Leads the Pack
With our industry best lead times (4-5 weeks on complex builds), full in-house engineering and design team, on-site manufacturing and fabrication facility just south of Houston, TX, and very large standard product inventory, Fork-Co is the right choice for your project. We stand behind our products 100%, either it accomplishes your goals, or we aren't done.